ADT® Authorized Dealer Serving Naperville, Aurora, & Surrounding Areas
ADT smoke detector in a Naperville family room
May 24, 2021

Monitored Fire Alarms Vs Smoke Detectors In Naperville

The National Fire Protection Agency recommends a smoke detector.  At a minimum, your home should have a smoke detector in every bedroom, the hall leading to sleeping quarters, and on each floor of the structure (including the basement). But, should you just place a standard smoke detector, or do you opt for a more advanced monitored fire alarm? Let's look into the monitored fire alarm vs. smoke detector in Naperville discussion and learn which one you have to use for your family and house.

Typical Smoke Detectors Only Detect Smoke

As the name suggests, typical smoke detectors only trigger when they detect an excess of smoke. Then they sound off -- usually with a high-decibel beeping -- until you reset the alarm. Naturally, there's no guarantee that anyone will notice the noise if you’re [[away|absent|not home].

Optimally, you ought to install robust smoke detectors that are designed for both smoke from both roaring and smoldering remnants. It might be best to pair your devices so every alarm goes off in unison. This way, you will hear if there's a fire from a floor up, even if it takes place from a spark in the ground floor.

Monitored Fire Alarms Alert You To A Fire Emergency When You Are At Home Or Out And About

A monitored fire alarm appears and hangs the exact same way as your ordinary smoke detector. If they detect fire conditions within the house, they'll create a high-pitched warning. But, there's a myriad of features that your monitored fire alarms can accomplish that your smoke detectors cannot.

For starters, high-tech sensors will look for growing heat in addition to different kinds of smoke. When they discover flames, they'll tell a monitoring team as well as set off the high-volume alarm. That lets you focus on escaping out of the house while your monitoring specialist calls emergency services. And because your monitoring center is on alert 24/7, your alarms will always alert an expert no matter where you are.

Monitored fire alarms commonly pair into your Naperville home security system. Other tools paired to the same system can be programmed to respond when your fire alarms trigger. For instance, your linked thermostat can automatically turn on the vent fan, which can help stifle fire expansion. Or have your entire home jump into motion making the lights come on, your smart locks open, and your security system deactivate. You can even have your system send your phone a message to know that your house is in crisis while you're out of town.

ADT monitored heat detector in Naperville 

The Decision In Monitored Fire Alarms Vs. Smoke Detectors in Naperville

It's pretty easy to see what wins in a direct comparison between monitored fire alarms and smoke detectors. You just get so many more tools with a monitored fire alarm.

Standard Smoke Detectors:

● Triggers high-decibel bell when the device senses an abundance of smoke

Monitored Fire Alarms

● Triggers high-decibel alarm when the component senses an abundance of smoke

● PLUS has sensors for high heat

● PLUS pairs with your home security system

● PLUS contacts a 24/7 monitoring center which will send emergency responders

● PLUS transmits you a notification to your phone

Get Monitored Fire Alarms In Your Naperville Home Security System

To pull the most from your monitored fire alarms, like them to a state-of-the-art security system, like ADT. Luckily, Secure24 Alarm Systems can customize your ADT home security package to incorporate fire and safety alarms. Just call (630) 360-2986 or send in the form below to get started.